Product Description

The VID Fire-Kill Model Tampa & Biscay are open low pressure watermist nozzles integrated into thin walled stainless steel pipes and designed for bilge area protection with pure watermist in engine rooms.
The design saves cost on fittings as well as reduces the risk of getting impurities into the systems when nozzles are installed since there are fewer connections. The design ensures correct nozzle spacing installation. Finally the firefighting with pure watermist enables fast refurbishment in case of fire and less corrosion damages in case of activation.

Product Approval & Scope

Approval

The Model Tampa & Biscay nozzles are MED Approved by DNV (Det Norske Veritas) to IMO MSC/Circ. 1165 “Bilge tests”. Model Biscay was tested with a Bilge area height of 0.75m whereas Model Tampa was tested with a bilge height of 1.1m. Both where tested with a nozzle position at 0.35m and 0.45m measured from the floor.

Scope

Model Tampa & Biscay nozzles can be used in areas where large concentrations of Class B fuel is collected in pools such as in bilge areas. The Model Tampa & Biscay nozzles shall always be installed between 0.35 and 0.45m above floor and can cover bilge maximum heights up to 0.75m (1.1m for Tampa).

Product Uniqueness

– Pure watermist ensures less corrosion damage,
– Pure watermist ensures faster refurbishment after fires,
– Can protect high bilge areas,
– Large nozzle orifices reducing posibility of clogging,
– Robust nozzle design for very harsh environments,
– Low water pressures.

Model Tampa & Biscay related documents